Sixguns

This might be a trivial question or in the wrong forum section, but has anyone looked at, purchased or shot any of the various UMAREX Colt pellet revolvers?  Although I have four .22 cal. and one .45 Long colt type revolvers, for various reasons I do not get to shoot them very often.  However recently I purchased several versions of the subject revolvers and now I can shoot daily in my backyard 50 foot range and no one is the wiser.

i have a 44 mag in a ruger sbh(4 5/8" barrel) and i've gotten 400+ boolits that are 280gr wfn gc. since i'm disabled(right leg/arm don't work) , i've found that i like the 250gr mihek hp under 7.0gr of unique and a 44 sp case. i don't do much 44 mag, but i figure that i have to use a 44 mag. (just me, but a 44sp goes 250gr, 265gr it might go). does anyone have a titegroup load i could use for 280gr boolit? or would i be be better off using a unique load(i have that)?

Hello fellow sixgun fans, to keep a long story short I've dreamed of having a
custom Ruger sixgun since I was a teenager in the 1990s, but have never
gotten around to living that out despite owning a number of stock Ruger
revolvers (including a 9mm Speed Six and 9mm SP101), and a .32 H&R
Single Six that the prior owner had customized.

Fast forward to
the present, and I have some decent cash on-hand since I sold some
big-ticket items, no debts, no wife/kids, and I figure now is the time
to get a dream Ruger. My budget is roughly $2k but I could go a little

Does anyone have a used or new 3rd Gen Nickel Colt 45 ACP Cylinder they want to sell?

 My first 44-40 cal. Its a 4-7/8" . Barrel is stamped Colt Frontier Sixshooter.  I bought 3 boxs of ultramax cowboy loads to shoot and ordered dies. I am excited to head to range!  I plan to use it for a self defence pistol in a tom threeperson belt holster. I called Colt today they said it was made in 1993 and no longer made. Was made for a few years only in the 3rd. Generation series other than the early prewar frontier sixshooters.

Hello all
I am a 58 year old man and I am having a hard time seeing the front sight on the single six hunter. Do any of you know of some one that makes sights for this gun. Some told me that a sight off of Ruger model 1 will work.

High everyone, I just logged in for the first time. I am looking for some info.
I have a 2nd generation Colt SA.  It was produced in 1958 and I bought it when I was 18 years old . I still have it and is in pristine condition.

Was reading about the new Charter arms "Boomer". Link is below. Chris S
http://www.gunblast.com/Charter-Boomer.htm

Howdy,

I love SA Revolvers and have a Cimarron Arms Doc Holliday Special in 45 Colt with a 3 1/2 inch barrel. I've had it for many years and never fired it as it was 1 of 500 made. A few weeks ago I decided...what the heck..I'm almost 69 and I just wanted to shoot the darn thing. So I went to my local range and had a blast! I was hitting the kill zone every time and even was able to do several head shots!

I haven't posted here for a long time. For the past year I have been overcoming a compression fracture of the the lumbar; received while innocently toodling around the ranch in the faithful old pickup. Then, my right hip went bad, I tore my left shoulder out of the socket, and I contracted pneumonia. The amazing thing is that they were all from separate instances. Since I seem to be on the mend, I have been celebrating joyously in my favorite gun store in Tupelo, Hunters Haven.